Kimball Footprint Lateral File with Hinged Door Storage, Инструкция по сборке

Страница: 2 / 2

Assembly Instructions
Footprint ®
Page 2 of 2
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2066787 Revision B-08
Lateral File with Hinged Door Storage,
continued
6. Adjust door alignment as necessary. There should be a
slight gap between the doors and doors should be level
with each other when they are properly aligned.
Doors out of horizontal alignment (Figure D): Turn screw
labeled “A” (Figure C) clockwise to decrease margin or
counterclockwise to increase margin.
Doors out of vertical alignment (Figure E): Loosen screws
labeled “B” (Figure C). Reposition door up or down for
proper alignment. Retighten screws.
Note: Vertical misalignment can also occur is unit is not level.
Doors out of alignment with the side of the overhead
(Figure F): Slightly loosen screw labeled “C” (Figure C).
Reposition door. Retighten screw.
Figure C
Figure D
Figure E
Figure F
End Panel
Doo r
Doo r
Doo r
Doo r Doo r
Doo r in O p en Position
Inside Panel
Sc r ew ìA ”
Sc r ew “ B ”
Sc r ew “ C ”
Dislod g e Tab
Sc r ew “ B ”
Printed in U.S.A.
© 2008 Kimball Inter
national, Inc.
T 800.482.1818
F 812.482.8300