Kimball 22-832, Руководство пользователя, Страница: 9 / 22

When the circuit breaker is tripped, the LCD will display as below
(Figure 2). All other functions of the tool are still active, which
means you can still probe a circuit and observe the voltage
reading. When the circuit breaker is tripped, the tool will NOT
be able to conduct battery current to the tip even when the
power switch is pressed. Intentionally tripping the breaker and using
the tool to probe can be considered an added precaution against
accidental pressing of the power switch.
3 .8 Work mode
Auto Circuit
Breaker Break
Fi
gur
e 2
There are four modes to diagnose electrical systems, they can be
accessed by depressing the Mode Button and cycling through each one.
DC voltage
With the tool in DC voltage mode, contact the probe tip to a
circuit, the LCD display will read the DC voltage with a
resolution of 0.1 volt (Figure 3).
12.5V
Fi
gur
e 3
AC voltage
With the tool in AC voltage mode, contact the probe tip to a
circuit, the LCD display will read the maximum voltage, the
minimum voltage and frequency( Hz ) (Figure 4).
- 7 -