Kimball Office Xsite Door Kit for Fold Down Tile, Инструкции по сборке системы

Страница: 2 / 2

Systems Assembly Instructions
Xsite
Printed in U.S.A. © 2006 Kimball Inter
national, Inc. T 800.482.1818 F 812.482.8300
Page 2 of 2
Installation, continued
6. Align #10 flat nylon washer, then hole in pivot arm with
middle hole on inside of tile. Insert #10-24 Phillips pan
head bolt. Install #10-24 hex lock nut and tighten. Repeat
for opposite pivot arm. (Figure D).
7. Attach magnetic catch to upper inside edge of storage tile
by inserting two #6 x
1
/
2
" screws into pre-drilled holes and
tighten. (Figure E).
Note: If storage tile was produced prior to 10/15/03, magnetic
catch holes will need to be located and drilled on site.
8. Insert top of tile into upper Xsite Traxx ® and lower into
Xsite Traxx below. (Figure F). Carefully slide left or right
to align.
Figure D
Xsite Traxx
Figure F
Figure E
Catch Body
Magnets
#6 x
1
/
2
" Screws
#10-24 Phillips
Pan Head Bolt
#10 Flat Nylon Washer
#10-24 Hex
Lock Nut
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2019612 Revision A-06