Systems Assembly Instructions
Footprint
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 1699194 Revision B-07
Page 2 of 3
Installation
3. Slide the attachment bracket OUTWARD to the extent of
the slots. Slide the doubler bracket towards the top of the
case. Hold brackets in position and tighten all fasteners
securely. (Figure C).
4. Repeat Steps 2 and 3 to attach brackets to the opposite end
of the case. (Figure D).
5. For Lunar overhead to be mounted on Interworks panel:
Follow Step 2 but DO NOT attach the doubler bracket.
6. Slide the attachment bracket INWARD to the extent of the
slots. Hold bracket in position and tighten all fasteners
securely. (Figure E).
Remember: Doubler brackets are NOT USED for Interworks
panel mount.
7. Repeat Steps 5 and 6 to attach bracket to the opposite end of
the case.
Figure D
Figure E
Doubler Bracket
(Cetra only)
Panel
Attachment
Bracket
Figure C
Top
Slide Doubler Bracket
towards top as far as
possible
For Cetra,
brackets mount
at outer extent
of slots
Slide Attachment
Bracket outward
to extent of slots
For Interworks,
brackets mount
at inner extent
of slots
Bottom Shelf
