Systems Assembly Instructions
Footprint
®
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 1699194 Revision B-07
Page 1 of 3
Installing Cetra
®
/Interworks
®
EQ
Panel Attachment Brackets to
Lunar Overheads
Tools Required
■
#2 Phillips Screwdriver
■
7
⁄
16
" Hex Socket
■
1
⁄
4
" or
3
⁄
8
" Socket Driver
■
7
⁄
16
" Open End Wrench
Package Contents
■
Cetra/Interworks EQ Panel
■
Cetra/Interworks EQ Panel
Attachment Bracket (LH)
Attachment Bracket (RH)
■
Doubler Bracket
■
1
⁄
4
" Bolt, washer and nut
Note: This instruction covers installation of panel attachment
brackets to Lunar overheads that will be mounted on Cetra or
Interworks EQ panels. All operations to assemble the bracketry
can be done by one person, but it is recommended that a two
person team assemble and install the units to the panel system.
Important: Reference the assembly instruction “Lunar
Overhead Storage, Flipper Door Cabinet” for assembly of
the Lunar Overhead. The units are assembled in the inverted
position. Moving the units without the bracketry attached can
cause damage, therefore all bracketry in this instruction is
installed with the overhead unit in the inverted position.
1. The assembled overhead unit is in the inverted position.
(Figure A).
2. For Lunar overhead to be mounted on Cetra panel:
The hook-type attachment brackets are right-handed and
left-handed. The flange sides with the hooks orient toward
the outer end of the overhead. Additionally, the doubler
bracket mounts over the inboard face of the main bracket.
The elongated end hook (rhino horn) is oriented towards
the top of the case. All brackets are attached using
¹⁄₄
" bolts,
nuts, and washers. Take note of location of mounting holes
and attach bracket and doubler bracket to unit as shown
using three (3) bolts, three (3) washers, and three (3) nuts
per bracket. Loosely secure the fasteners. (Figure B).
Figure A
Doubler Bracket
(Cetra only)
Figure B
Panel Attachment
Bracket
Top
Bottom Shelf
Rhino Horn
