Page 2
Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60800 • City of Industry, CA 91716-0080 • 626/968-5666 FAX 626/330-3861
KLV201
Installation Instructions
LAMP INFORMATION
CAT. NO.
LAMP TYPE
MAX. WATTS
KLV201
MR16 Bi pin
75
Halogen
*Note:
Swivel stem must be installed with the
mounting threads facing down-to-horizontal.
Fixtures may not be installed with mounting
threads facing upward unless shielded from
rain or sprinklers.
180°
Adjustability
90°
*
*
FIXTURE ORIENTATION
(See *Note Below)
KIM LIGHTING LIMITED WARRANTY
When installed in accordance with Kim Installation Instructions and
accepted trade practices, the following shall apply:
General Product Limited Warranty Coverage
All material and component parts used in the manufacture of Kim
Products, are warranted to be free from defects of material and/or
workmanship for a period of 1 year from date of sale, with the following
exceptions:
Auxiliary Equipment
All auxiliary equipment (such as lamps, ballasts, and transformers)
provided by and/or included in Kim Products shall carry the
component manufacturer's warranty.
Copper and Bronze Landscape Components
Copper and Bronze Landscape fixture components shall be warranted
against defects of material and/or workmanship, and failure due to
corrosion, for a period of 25 years from date of sale.
Composite In-Grade Components
Composite In-Grade fixture components installed below grade, shall
be warranted against defects of material and/or workmanship, and
failure due to corrosion, for a period of 7 years from date of sale.
Aluminum Landscape Components
Aluminum Landscape fixture components not in direct contact with
soil, shall be warranted against defects of material and/or workmanship
for a period of 3 years from date of sale. Aluminum fixture components
in direct contact with soil shall be warranted from defects of material
and failure due to corrosion for a period of 1 year from date of sale.
Limit of Liability and General Conditions
Only products which are installed, used and maintained in accordance
with applicable Kim instructions, specifications and accepted trade
practices, are covered by the Kim Warranty. During the warranty
period, with proof of purchase, Kim will repair or replace with the same
or similar product, at Kim's option, without charge. Labor costs are the
owner's responsibility and are excluded from this warranty. This
warranty is void if the product is modified, tampered with, misapplied,
poorly installed, improperly maintained, or subjected to abnormal
conditions.
Repair or replacement as provided under this warranty is the exclusive
remedy of the purchaser. This warranty is in lieu of all other warranties,
expressed or implied, including any implied warranty of fitness for a
particular application. Kim Lighting shall not be liable to the purchaser
for indirect or consequential damages.
How may we serve you better?
Please let us know. Visit our website at:
www.kimlighting.com
Your concerns are important to us.
6.
Loosen setscrew, adjust fixture rotation, and
tighten setscrew. Connect fixture to main
system cable with a KLV410 Sealed
Connector. (See KLV410 Installation
Instructions)
5.
Adjust angle using swivel screw. Retighten
after adjustments.
Additional wire and connectors may
be purchased from Kim Lighting: KLV427 #12-2 Cable
KLV432 #8-2 Cable
KLV410 Connector
KLV411 Connector
