Page 2
KIM Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA 91716-0080 • 626/968-5666 Fax 626/330-3861
Accent Lights EL210 & EL220
Installation Instructions
LA6 (EL220 Only)
Optional Lens / Lens Clip
HS220 (EL220 Only) Optional Half Shield
Tool Required:
❑
B
” Hex Wrench
1. Slip shield over end of fixture.
2. Adjust shield to desired orientation, and tighten
screw to secure.
1. Slip lens into fixture, convex side out.
2. While pinching ends of lens clip together, place
clip into fixture end (on top of lens). Release
ends to secure lens.
KIM LIGHTING LIMITED WARRANTY
When installed in accordance with Kim Installation Instructions and
accepted trade practices, the following shall apply:
General Product Limited Warranty Coverage
All material and component parts used in the manufacture of Kim
Products, are warranted to be free from defects of material and/or
workmanship for a period of 1 year from date of sale, with the
following exceptions:
Auxiliary Equipment
All auxiliary equipment (such as lamps, ballasts, and transformers)
provided by and/or included in Kim Products shall carry the
component manufacturer's warranty.
Copper and Bronze Landscape Components
Copper and Bronze Landscape fixture components shall be
warranted against defects of material and/or workmanship, and
failure due to corrosion, for a period of 25 years from date of sale.
Composite In-Grade Components
Composite In-Grade fixture components installed below grade,
shall be warranted against defects of material and/or workmanship,
and failure due to corrosion, for a period of 7 years from date of
sale.
Aluminum Landscape Components
Aluminum Landscape fixture components not in direct contact with
soil, shall be warranted against defects of material and/or
workmanship for a period of 3 years from date of sale. Aluminum
fixture components in direct contact with soil shall be warranted
from defects of material and failure from corrosion for a period of 1
year from date of sale.
Limit of Liability and General Conditions
Only products which are installed, used and maintained in
accordance with applicable Kim instructions, specifications and
accepted trade practices, are covered by the Kim Warranty.
During the warranty period, with proof of purchase, Kim will repair
or replace with the same or similar product, at Kim's option, without
charge. Labor costs are the owner's responsibility and are
excluded from this warranty. This warranty is void if the product is
modified, tampered with, misapplied, poorly installed, improperly
maintained, or subjected to abnormal conditions.
Repair or replacement as provided under this warranty is the
exclusive remedy of the purchaser. This warranty is in lieu of all
other warranties, expressed or implied, including any implied
warranty of fitness for a particular application. Kim Lighting shall
not be liable to the purchaser for indirect or consequential
damages.
How may we serve you better?
Please let us know. Visit our website at:
www.kimlighting.com
Your input matters to us.
Correct
Installation
Incorrect
Installation
Lamp Gasket
IMPORTANT
Gasket Illustration
LAMP INFORMATION
Cat. No.
Lamp Type
Max. Watts
EL210
PAR 38 Only
EL220
PAR 38 or R40*
150
Incandescent
or Halogen
* Important: If the R40 lamp is used with the
EL220 (only) aimed up, LA6 lens is required to
prevent lamp breakage by thermal shock from
water. Do not aim R40 lamp down unless
protected from direct water spray.
