Kilpatrick Audio K4815 Скачать руководство пользователя

Страница: 3 / 16

K4815

// Pattern Generator

Installation and Setup

When installing the K4815 in your modular system, pay close attention to the pinout and direction of

the 16-pin power input cable. The K4815 contains protection against reverse connection, but please

double-check the cable before switching on the unit.

The warranty does not cover damage caused by

wrong installation.

Note:

Original K4815 modules re5V in addition to +/-12V. Serial numbers 1009501 and higher

only r/-12V. If you have an older model and wish to have it upgrade free of charge,

(parts and labour only) please contact Kilpatrick Audio directly for more information.

The K4815 Pattern Generator supports both MIDI and control voltage/gate/clock signals. To use the

MIDI function requires the use of a MIDI adaptor such as the K1600 MIDI Converter. But the K4815 can

be used by itself without any MIDI devices by using the analog inputs and outputs. If you are using the

module with another MIDI device using the internal MIDI cable, connect a 10 pin ribbon cable between

the two units. In this case also observe the correct cable direction.

Warning: DO NOT plug the MIDI cable into the power port, or vice versa.

User Manual

Hardware Version D/E
Firmware Version 1.1x
February 16, 2011
© 2010 Kilpatrick Audio

Содержание K4815

















Результаты поиска

Содержание K4815

Отзывы:

Похожие инструкции для K4815

Бренды по названию

Популярные бренды

Kilpatrick Audio K4815, Руководство пользователя

Результаты поиска

Содержание K4815

Отзывы:

Похожие инструкции для K4815

Бренды по названию

Популярные бренды