Kilowatt Labs SIRIUS SD LOGGER, Руководство пользователя

Страница: 12 / 13

Sirius SD Logger – User Manual
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
12
8. CS – Calibration State Flags (0000000 -> 00111111)
bit 0 – Current Calibration (Zero not Calibrated and 1 for Calibrated)
bit 1 – No Load Current Calibration
bit 2 – Temperature Calibration
bit 3 – Capacity Configuration
bit 4 – Serial Number Configuration
bit 5 – QC Passed Flag
bit 6 – Reserved
bit 7 – Reserved
9. SOC – State of Charge (integer value)
10. RR – Battery Terminal State (Zero means SSR is OFF and 1 means SSR is ON)
11. BL – Balancing State
1 – Balancing is OFF (Default)
2 – Balancing is ON
12. RTC – Status of real time clock of the Sirius Module.
0 – RTC is not set or RTC is not working
1 – RTC is running with proper time
5 – RTC needs to configure
13. SD – State of SD Card (inside the Module).
1 – Working
2 – Error
3 – Standby: Standby means SD Card or RTC has problem and SD card brought to idle to avoid
dangerous errors.
14. CHBL – Balancing while charging flag. This is not applicable when connecting the modules in series.
0 – Disabled (Default)
1 – Enabled