Sirius Capacitor Module
13
User Manual - 7.1kWh48VDC Module
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
www.kilowattlabs.com
Procedure
:
Shut down the module and check the room temperature and ensure the cooling units
are operating properly. Leave the module to cool till the module temperature comes below 75°C.
Now, turn ON the module.
Connect Cable
Procedure
:
When the LCD shows the above error, ensure that the cables are connected and
tightened properly.
Multiple Errors
The above-mentioned errors can occur simultaneously and will be shown on the LCD. To clear
these, follow the steps explained in the above sections.
Maintenance
The Sirius Capacitor Module does not require periodic maintenance.
Safety
•
Never touch the positive (+) or negative (
–
) terminals as the module can be charged and cause
fatal electrical shocks. Always verify that the module is fully discharged before handling the
module.
•
Ensure precautions to prevent short-circuit under all circumstances.
•
Do not operate unit above the specified voltage.
•
Do not operate unit above the specified temperature rating.
•
Do not touch terminals with conductors while the module is charged. Serious burns, shock,
or material fusing may occur.
•
Wear protective equipment when handling these modules including gloves, eyewear and
hardhat.
•
Protect surrounding electrical components from incidental contact.
•
Do not use the module in an open environment, in rain or in a place exposed to water and
other liquids.
•
In case the module is physically damaged due to any event, do not install and energize the
module under any circumstances and contact your reseller.
