DC Outlets
WARNING
Never use a damaged or frayed DC cord; electrical shock can occur if the DC cord is
damaged or frayed. If DC cord is damaged, replace with a new cord before proceeding
with DC usage. Contact KiloVault to request replacement DC cords.
How you use the DC Anderson Powerpole outlets (see left photo above) depends on the
amperage of your chosen load. For loads between 0 and 15 amps, you will need an Anderson
Powerpole extension cord. First, plug the extension cord into the desired device. Then, plug the
other end of the extension cord into the Anderson Powerpole outlets
on the back of the system
(see right photo above).
Plug black into black and red into red. Do not use an Anderson
Powerpole extension cable for loads greater than 15 amps. For loads greater than 15 amps but
less than the 20-amp max, plug the device directly into the Anderson Powerpole outlets
on the
front of the system (see left photo above)
.
To use the DC cigarette outlet (see left photo above), simply plug in any 12-volt device (
10 A
maximum
) and operate as normal.
KiloVault LLC - 330 Codman Hill Road - Boxborough, MA 01719 - https://kilovault.com/ - (888) 218-5924
13
