5
1)
Do not allow chemicals such as acetone, benzene, thinner, trichloroethylene ketone, or other similar chemicals to come in
contact with the sensor screwdriver housing as damage will result.
2)
Use the sensor screwdriver carefully, do not drop or be impacted, it is best to use a balancer to lift it, and set it on the auxiliary
arm for operation.
3)
Loading and unloading the sensor driver head: Simply pull down the screwdriver head cap with your fingertips to freely attach
or detach the sensor screwdriver head, release the finger to return the screwdriver head cap to fix the sensor screwdriver head.
Note: Make sure to turn off the power switch and remove the power plug from the socket when installing and removing the
sensor driver.
4)
Do not drop or abuse the sensor screwdriver.
5)
Connect the power cord to a power outlet.
CAUTION: Danger of electric shock due to wet power cord plug or hands.
6)
Do not use this screwdriver for tightening wood screws. This is “ Metal Assembly sensor screwdriver ”
7)
The control settings of the sensor screwdriver can be set by the KL-TCG controller. Please refer to the KL-TCG operation
manual for setting adjustment.
8)
The sensor screwdriver operation can be set to the press-plate start/down-press start/pull-screw start…etc. by
KL-TCG controller. Please refer to KL-TCG operation manual.
9)
Operation frequency: The original setting of the frequency is 2 sec on / 5 sec off. The number of screw fastened is
about 9 pcs. Over frequently using makes the motor overheated and damage to screwdriver.
Enough heat-dissipation is good for screwdriver.
10)
Whenever the sensor screwdriver is not used, turn off the power for the controller or unplug the power cord..
11)
Don't touch switch during operating for keeping system from wrong judgement..
12)
Please use the designated connection cable for KL-TCG.
13)
Please collaborate it with Auxiliary Arm.
Operations Cautions
