Kilews SKP-BC32HL-100N, Руководство по эксплуатации и обслуживанию

Страница: 12 / 27



11
※
Push three seconds to enter the selection SL====SC====At====RC====SP====Ht====Lt====LL
<Confirm>
Function Name
Set up
Time and
Value
Description Buzz Time/ Light
Manufactur
er Set-Up
Value
SL
01~05
Screw List --- ---
SC
01~99
Counting number / count-down only
---
05
At 0.1~9.9
Automatic zero time / Signal output time
--- 1.0
RC
0.1~9.9
Slow start time
---
---
SP
L0~L9
Speed of start
：
30
％
-100
％
with rated L0~L9
---
L0
Ht
0.0~9.9
Ht time Stop time ( Show wrong as screwdriver
can’t sop at set time after starting, can be used to
test stripped screws Five buzz and LED red
flash
2.0
Lt
0.00~9.90
Lt time will show wrong as screwdriver stops before Lt
after starting, can test screw is not properly fastened at its
position. . Two buzz and LED red
flash
0.00
L
L
0.01~9.90
Reconfirm time after fastening.
---
0.00
Backward to
Count-Up )
1 COUNT
When screwdriver is backward, the number will be
back one
--- ---
Ln ---
Automatic learning. LED keeps flash of light
---
Buzzer
Er
Wrong
Set-Up ---
Wrong Set-Up, such as Lt
＞
Ht
Continue to ring and LED
red flash. Press
select/confirm show Er
---
PROCESS TO SET UP SYSTEM:
1
、
Please connect the cord, turn on the power switch until LED shows number.
2
、
Please press SELECT key over three seconds till buzzer making sound, the panel will show ,
to push UP/DOWN to decrease or increase the number, it can set up five units of number.
3
、
To press SELECT key, buzzer will sound, the panel will show , to push UP/DOWN to
decrease or increase number, the maximum can set up 99.
SC: To set up counting number.
4
、
To press SELECT, the screen will show , push UP/DOWN to increase or decrease
number, the maximum can set up 9.9.
At: Automatic set up CLEAR time.
5
、
To press SELECT, the screen will show , push UP/DOWN to increase or decrease
number, the maximum can set up 9.9.
Rc: To set up slow-start time.
6
、
To press SELECT, the screen will show , , push UP/DOWN to increase or decrease
number between L0~L9, the maximum can set up L9.
SP
：
To set up speed of slow start.
7
、
To press SELECT, the screen will show , push UP/DOWN to increase or decrease
number, the maximum can set up 9.9.
Ht:
：
Stop time.
8
、
To press SELECT, the screen will show , push POWER key , adjust decimals,
UP/DOWN to increase or decrease number, the maximum can set up 9.90.
Lt: Set up Detect Start Time.”02.”means 0.02.
System setting