4
7) Kindly note that SKD-RBN60/90/120/180/120F/180F/250 will be enclosed with thetorque fixing ring.
The torque fixing ring can protect the operator and avoid getting hurt by the threads on the screwdriver.
And it can fix the torque and prevent the torque to be adjusted.
In order to prevent getting hurt, kindly check if the torque fixing ring is fixed when using the screwdriver and
adjusting the torque.
8) When operating a tool for over 70 kgf.cm application, please make sure to use it with an auxiliary arm to
avoid the operator's injury or unexcepted tool performance.
If a user doesn’t mount the tool on an auxiliary arm, he/she needs to take the responsibility for any injury or
product quality issue caused.
9) Clamp fixed position for 3cm Nylon Fixed-Wire
The clamp fixed position for 3cm Nylon Fixed-Wire is at 235mm start count from the top of the screwdriver flat
surface (for direct cable), as shown in Figure 1.
The clamp fixed position for 3cm Nylon Fixed-Wire is at 285mm start count from the top of the screwdriver flat
surface( for 15 cm tail cable), as shown in Figure 2.
The clamp fixed position for 3cm Nylon Fixed-Wire is at 390mm start count from the top of the screwdriver flat
surface (for Iron ring socket type), as shown in Figure 3.
ON
Product Name
Description Use
(1)
Suspension Hook
Convenient Production Lines Able to Hook Hanging Device Balancers Work
Together With The Tools to be More Efficiently.
(2)
Side Handle Ass'y
Auxiliary High Torque Assemble. The Operation Use.
(RBN250F/350/RBK500 are not attached)
(3)
Bit Ssleeve For Hex
Fixed Bit Use.
(4)
Torque Adjusting Ring
Adjust torque Use.
(5)
Coupler
Fixed upside-underside housing and clutch Use.
(6)
Trigger switch
when the trigger switches, the screwdriver starts functioning, it stops when the
screw has been tightened up or the trigger has been released.
(7)
F/R Switching Element Switching Forward / Reverse Use
(8)
Suspension Hook Hole Loading Suspension Hook Use
(9)
Screw
According to the customer's request, the hexagonal socket head screw can be
locked to fix the torque fixing ring.
