5
Function / Operating Introduction
Function Name Figure
No.
Description
(1)
push down the screwdriver to start
(2)
Trigger Switch
(3)
Bit Sleeve
(4)
Torque Fixing Ring
(5)
Torque Fixing Ring/Coupler
(6)
Driver Hook
(7)
S waist Screw Hole
(8)
S Waist Hook
(9)
OK/NG/Power/Hi&Lo Indicating Light
Manual / Function
1.
Full Auto Shut-Off Screwdriver
It stops automatically when the screw has been tightened up and reached the set-up torque level.
The device will not cause damage of task since no continue running after screws are tightened.
(1)
BS45P series are push start type cordless screwdriver. Holding screwdriver (without press lever)
push it all the way down to your object and at this moment screwdriver's bit is making
clockwise turn. The screwdriver can be shut off by either stop pushing or when screw has been
tightened up.
(2)
Lever: It will enable reverse mode by press lever on BS45P series. To do so:
(a.) Press lever from your screwdriver.
(b.) Push screwdriver against to your object and at this moment screwdriver’s bit is turning
counterclockwise. To stop spinning by stop pushing screwdriver.
(c.) It will not change bit’s spinning direction if leave or press lever during pushing screwdriver.
(9)
(8)
(7)
(6)
(2)
(5)
(4)
(3)
(1)
push down
screwdriver
Forward (screw)
Reverse (unscrew)
(1).
Press lever from
your screwdriver
(2).
push down
Screwdriver
