4
Battery
Release Button
2.1
Below illustration is showing the process of correct install & disassemble the rechargeable
battery. The beep sound comes along with a flash while the screwdriver is supplied genuine
battery installation. It could be operated once the battery has been identified.
2.2
Too slow to install the battery may cause error identification so the beep sound and flash would
be continuing. In order to function properly, re-assembling it as below process again.
3. 90° Attached Turn forward a little bit to adjust the attached angle,
angle adjustment then turn reversed to lock it.
Insert Battery Steps
((1)Insert the rechargeable battery into the device follow by the arrow as showing.
(2)Assembled completely.
Remove Battery Steps
(1)Press the release button and (2)Follow the arrow direction. (3)Removed
completely.
take it out of the device
Battery
Release Button
