7
(5) Hole for wrist band
Enable to install the wrist band which is more convenient and safer for users.
(6) Waist hook
The waist hook allows users to carry the device easily by attaching it to their work belt.
(7) Functional light and the status indicator
Whenever the remaining power in the rechargeable battery is fewer than 20%, the tool is still
alive but with red flash lights on. Once the remaining power is towards10% or even fewer it
may result in poor performance with the continuing red lights on.
(8) H/M/L time control switch
Time control switch H/M/L is to control the running time of the screwdriver after screws are
fastened up. When set the H/M/L switch to Hi, the device will complete the impacting and
fastening process under 5 seconds. When set the H/M/L switch to Mid, the device will
complete the impacting and fastening process under 3 seconds. When set the H/M/L switch to
Lo, the screwdriver will complete the impacting and fastening process under 1 seconds.
2.
Chemicals, Acetone, Benzene, Alcohol, Thinner, Ketone, trichloroethylene, etc shall not be in
contact with the surface of the screwdriver in order to prevent chemical damage.
3.
Please pay attention when operating the rechargeable screwdriver. Do not drop or abuse the
screwdriver.
4.
Not allow to turn the H/M/L switch during operation in order to cause system malt-function.
5.
During operation, the Forward/Reverse switch has been changed accidentally that the device
will enable its self-protecting mode which is power off. Re-start the tool when this happen.
6.
When switches Forward/Backward switch during the screwdriver still operating, the protection
mechanism will be triggered and cause the motor to stop. Restart the screwdriver again will
change back to normal.
7.
Each operational torque setting, using time and frequency may result in different level of wear
and tear, at higher torque setting and use extensively could accelerate the wearing down of tool.
After one month, the torque is getting reduce gradually at the rate of 2~3% or 3~5 %( max
torque). The longer use of the device, torque reduction will become stable and the users could
measure the torque by a tester on a regular time schedule to check if the torque power still
meets the criteria.
Other Cautions
1.
T
The best condition of using the tool is under 8 hours a day, do not over loaded.
according to operating frequency and torque loaded, we suggest adding lubricating oils in
clutch per 3-6 months, and kindly contact with distributor when product's maintenance .
2.
Do not attempt to repair or disassemble this cordless screwdriver without authorization. Always
have the device serviced by assigned factory or qualified person in order to have the warranty
effective continually.
3.
ANLIDAR is not responsible for any poor performance or damage caused by customers own
modification of the tool.
4.
It is necessary for the
management to have individual operators read and follow up all
instructions in this manual. Do not attempt to repair or disassemble this cordless screwdriver
themselves.
