6
※
COMBINATION OF THE THICKNESS FOR REFERENCE
※
Table b
Dia. of Screw
Bolt (d) mm
Accessory-Tooling Plate
(Rear) mm
Dia. of Screw
Bolt (d) mm
Accessory-Tooling Plate
(Rear) mm
1.2
0.5*2+0.2*2=1.4
2.6
0.2 + 0.5 * 5 = 2.7
1.4
0.5 * 3 = 1.5
3.0
0.2 + 0.5 * 6 = 3.2
1.7
0.2 * 2 + 0.5 * 3 = 1.9
3.5
0.2 + 0.5 * 7 = 3.7
2.0
0.2 + 0.5 * 4 = 2.2
4.0
0.2 + 0.5 * 8 = 4.2
2.3
0.2 * 2 + 0.5 * 4 = 2.4
5.0
0.2 + 0.5 * 10 = 5.2
4.
After width adjustment of the rail assembly, place a screw into the groove
and slide it up and down to both sides. Then check whether the
movement is smoothly.
※
NOTE THE FOLLOWING WHEN MAKING ABOVE ADJUSTMENT
a. Please be sure to keep the width of rail from the beginning to the end
uniformly.
b. When adjusting the width of front rail assembly, the screw of step 1 must
be fastened.
