Kikusui TOS9200, Руководство по эксплуатации

Страница: 75 / 172

TOS9200/9201 Basic Operations 3-37
Turning the timer ON/OFF
Make ON/OFF settings for the timer function.
When the timer function is turned on, the test time can be controlled as speci
fi ed in
“Setting the test time” in the next section. When the preset test time has elapsed
with the resistance recorded between the lower and upper resistances, the test ends
with a PASS judgement.
The timer function can be set to ON/OFF using the SHIFT + F5 keys, regardless of
the location of the cursor. Each time the SHIFT + F5 keys are pressed, ON and OFF
alternate.
The keys can also be used to move the cursor to ON/OFF of the timer
function. If the cursor is at ON/OFF of the timer function, the rotary knob can be
used to make settings.
Turn the rotary knob clockwise : ON
Turn the rotary knob counterclockwise : OFF
Setting the test time (TEST TIME)
The time during which a preset voltage is applied to the DUT can be set to between
0.5 s and 999 s (at a resolution of 0.1 s for the 0.5 s to 99.9 s range and 1 s for the
100 s to 999 s range).
When the cursor is at TIMER, the rotary knob can be used to make settings.
1. To move the cursor to TIMER, press the F5 key (TIMER). (The
keys can also be used.)
2. Using the keys, move the cursor to the target digit.
3. Using the rotary knob, set the test time.
10
V
10.0
M
3.0
s
IR1 IR1
READY
UPPER
F1 F2 F3 F4 F5
SHIFT
UPPER
ON/OFF
TIMER
ON/OFF
LOWER ON UPPER ON TIMER OFF
LOWER
ON/OFF
VOLT LOWER UPPER TIMER
10
V
0.01
M
3.0
s
IR1 IR1
READY
LOWER
F1 F2 F3 F4 F5
SHIFT
LOWER ON UPPER ON TIMER ON