Kikusui TOS9200, Руководство по эксплуатации

Страница: 134 / 172

5-4 Controlling the TOS6200 TOS9200/9201
10. Using the rotary knob, set the TOS6200’s memory number to be used.
11. Using the key, move the cursor to the interval time to the right of the
memory number.
12. Using the rotary knob, set the interval time (0.2 s to 9.9 s, HOLD). With
the interval time set to HOLD, when the START switch is pressed, the
next step starts if the speci fi ed step is in the HOLD status.
13. In accordance with the above procedure, make settings for an earth
continuity test in the program step. Upon completion of settings, press
the AUTO key to return to the Program screen.
The Program screen displays the total number of steps thus set. The
tester enters the READY status.
5.2 Starting a Test
Screen settings
■
T OS6200
On the T OS6200, display the T est Condition Settings screen (MAIN).
The T OS9200/T OS9201 forcibly shifts the T OS6200 to the T est Condition Settings
screen (MAIN).
■
T OS9200/9201
On the T OS9200/T OS9201, display the Program screen (A UT O).
(T o display the Program screen (A UT O), press the A UT O k e y .)
Chec king the T OS6200 status
Con fi rm that the T OS6200 is in the READ Y status. In the READ Y status, the
T OS6200 displays “READ Y” at the top right of the screen.
Unless the T OS6200 is in the READ Y status, the T OS9200/9201 is unable to con -
trol the T OS6200.
AUTO AUTO
READY
PRG
00 : --UNTITLED--
TOTAL:10
01 EC 00-1.0s
02 DCW02-1.0s
03 EC 03-1.0s
Program name
Step No.
Program No.
Test step
Total number of steps
Repeat settings