Kikusui TOS8870A, Инструкции по эксплуатации

Страница: 6 / 56

IV
Safety Precautions
TOS8870A
Installation
• When installing products be sure to observe "Precautions for Installation"
described in this manual.
• To avoid electrical shock, connect the protective ground terminal to electrical
ground (safety ground).
• When installing products with casters, be sure to lock the casters.
Relocation
• Turn off the power switch and then disconnect all cables when relocating the
product.
• Use two or more persons when relocating the product which weights more than
20 kg. The weight of the products can be found on the rear panel of the product
and/or in this operation manual.
• Use extra precautions such as using more people when relocating into or out of
present locations including inclines or steps. Also handle carefully when relocat-
ing tall products as they can fall over easily.
• Be sure the operation manual be included when the product is relocated.
Operation
• Check that the AC input voltage setting and the fuse rating are satis fi ed and that
there is no abnormality on the surface of the AC power cord. Be sure to unplug
the AC power cord.
• If any abnormality or failure is detected in the products, stop using it immediately.
Unplug the AC power cord. Be careful not to allow the product to be used before
it is completely repaired.
• Do not disassemble or modify the product. If it must be modi fi ed, contact Kikusui
distributor/agent.
Maintenance and checking
• To avoid electrical shock, be absolutely sure to unplug the AC power cord before
performing maintenance or checking.
• Do not remove the cover when performing maintenance or checking.
• To maintain performance and safe operation of the product, it is recommended
that periodic maintenance, checking, cleaning, and calibration be performed.
Service
• Internal service is to be done by Kikusui service engineers. If the product must be
adjusted or repaired, contact Kikusui distributor/agent.
Check?