Kikusui TOS3200, Руководство пользователя, Страница: 49 / 130

TOS3200
49
Judgment System
4
TC and
PCC T
est
s
Test Wait Time and Judgment
You can set the time until the test actually starts after you press the START switch. Measured
values during the test wait time are ignored and do not affect the judgment as shown in Fig.
4-10. For example, if the test wait time is set longer than the startup time of the EUT, the mea-
sured values in the steady-state condition of the EUT can be evaluated.
p. 120
The maximum measured value is not held during the test wait time.
• SYSTEM1/5 > MEAS MODE > MAX
Fig.4-10 Measured values during the test wait time
TIMER LOWER UPPER
Measured value distribution
judgment
Lower reference Upper reference
OFF
ON
*1
ON
-
U-FAIL
-
U-FAIL
OFF ON
-
U-FAIL
ON
*1
OFF
-
-
OFF OFF -
*1. If TIMER is set to OFF, L-FAIL is not judged.
See
Test start
(START ON)
Normal end
(TIMER 0)
Upper reference
Lower reference
Pass judgment
Pass judgment
Pass judgment
LOWER ON
UPPER ON
TIMER ON
WAIT ON
This measured value is discarded.
This measured value is discarded.
Actual starting
of the test
Test period Test wait time
All measured values
during this time are
discarded.
0
Window comparator area
Measured value
·
·
·
·