Kikusui PWX1500H, Руководство пользователя

Страница: 55 / 131

PWX
55
2
Basic Functions
Preset Memory Function
The PWX series has the preset memory that stores three sets of the following settings: the
voltage, the current, the OVP, the OCP, and the UVL. You can recall the stored set from the
preset memory whenever you need.
To select the preset memory that you specify for saving or recalling a set of settings, press A,
B, or C key while holding down SHIFT key.
The recalling will be effective at the moment when you select the preset memory. To save the
present settings, you need to keep holding down the keys (SHIFT+A, B, or C).
Saving settings to preset memory
1
Press SET.
The SET key lights, and the present voltage and current settings are displayed on the
panel.
2
While viewing the values displayed on the panel, turn the VOLTAGE
knob to set the preset memory voltage and turn the CURRENT knob to
set the preset memory current.
p. 38
3
Press OCP•OVP.
The OCP•OVP key lights, and the OVP trip point and OCP trip point are displayed in
the display area.
4
While viewing the values displayed on the panel, turn the VOLTAGE
knob to set the preset memory OVP value and turn the CURRENT knob
to set the preset memory OCP value.
p. 40
5
Press OCP•OVP again.
The present UVL trip point is displayed.
6
While viewing the value displayed on the panel, turn the VOLTAGE knob
to set the preset memory UVL value.
7
Press SHIFT+the memory key (A, B, or C) to which you want to save the
settings. Hold the keys down until their LEDs turn on.
The PRESET A, PRESET B, or PRESET C LED in the display area—whichever one cor-
responds to the memory entry that you selected—lights to indicate that the preset
memory entry has been saved.
By following step7 , you can save preset memory entries when the output is on and the mea-
sured value display is being shown (the SET key LED is off). After you save a preset memory
entry, press SET to view the preset memory values.
See
See