PMX_MULTI
User’s Manual
95
Specifications
External dimensions
Unit: mm (inches)
PMX32-3DU/ PMX32-3TR/ PMX32-2QU External dimensions
*3.
This product confirms to Class A. This product is intended for use in an industrial environment. This
product may cause interference if used in residential areas. Such use must be avoided unless the user
takes special measures to reduce electromagnetic emissions to prevent interference to the reception
of radio and television broadcasts.
*4.
This is a Group 1 instrument. This product does not generate and/or use intentionally radio-frequency
energy, in the form of electromagnetic radiation, inductive and/or capacitive coupling, for the treat-
ment of material or inspection/analysis purpose.
*5.
This product confirms to Class I. Be sure to ground the protective conductor terminal of this product.
If not grounded properly, safety is not guaranteed.
*6.
Pollution is addition of foreign matter (solid, liquid or gaseous) that may produce a reduction of dielec-
tric strength or surface resistivity. Pollution Degree 2 assumes that only non-conductive pollution will
occur except for an occasional temporary conductivity caused by condensation.
4-
5
(holes for attaching
the rubber feet)
4-
30
(rubber foot diameter)
4-M4 screw holes
(max. screw insertion
depth: 6 mm)
214 (8.46)
70 (2.76)
275 (10.83)
55 (2.17)
32
(1.26)
150 (5.91)
32
(1.26)
78 (3.07)
275 (10.83 )
47 (1.85)
MAX 435 (17.13)
MAX 20
(0.79)
124 (4.88)
MAX 155 (6.10)
MAX 25
(0.98)
400 (15.75)
