Kikusui PMX32-3DU, Руководство пользователя

Страница: 58 / 104

58
User’s Manual
PMX_MULTI
Basic Functions | Tracking Function
 Procedure for TRACKING 2 (percentage change)
1
Press OUTPUT ALL to turn off the output.
2
Using CONFIG settings, select the channels that will operate in tracking mode
(CF09:
OFF
/
ON
)
(p.47)
.
3
Set the output values of the channels that will operate in tracking mode.
4
Press TRACK to enter TRACKING 2 mode. If TRACKING 1 is displayed, press
TRACK SET (SHIFT+TRACK) to change.
TRACKING 2 is shown in the display areas of the channels that will operate in tracking mode.
Press TRACKING SET (SHIFT+TRACK) to switch between TRACKING 1 and TRACKING 2.
5
Press SELECT to select the reference channel for TRACKING 2.
The selected channel is indicated with brackets.
In the setting display, the voltmeter and ammeter show “100.0 %”.
6
Press the OUTPUT key of the channel that will operate in tracking mode to turn the
output on.
7
Based on the percentage of the reference channel, turn the rotary knob to set the
desired output.
Press SET to switch between voltage/current display and percentage display.
To clear the TRACKING 2 operation, press TRACK.
TRACK DELAY
C B A ALM CLR DELAY SET TRACK SET PRL SER
OVP ࣭ OCP SET LOCK CONFIG
SELECT OUTPUT
CH1
SELECT OUTPUT
CH2
SELECT OUTPUT
CH3
SELECT OUTPUT
CH4
OUTPUT
ALL
FINE
CURRE
FINE
VOLTA
LOCAL
SHIF T
CV
V s
OFF
CC
A s
ON
PRL SER
TRACKING 1 2
LOCK
REMOTE
L AN L AN
DEL AY
DEL AY SET
SET OVP ࣭ OCP
PRESET A B C
ALARM
CV
V s
OFF
CC
A s
ON
PRL SER
TRACKING 1 2
CV
V s
OFF
CC
A s
ON
PRL SER
TRACKING 12
CV
V s
OFF
CC
A s
ON
PRL SER
TRACKING 12
% % % %
% % % %
TRACK/TRACK SET(SHFT+TRACK) key
Reference channel (indicated with brackets)
Reference voltage and reference current displayed as 100 %
Example of PMX32-2QU (reference channel: CH2, TRACING 1 operation: CH1 and CH2)