Kikusui PFX2532, Руководство по эксплуатации

Страница: 68 / 142

68
PFX2532
Protection Function and Warning Function
If a protection function is activated during a test, the ALARM/WARNING LED lights red, and the test
is aborted.
The warning function is activated when a test is not being executed. In this case, the ALARM /
WARNING LED lights orange. You cannot start a test in this condition.
In case of emergency, you can immediately stop all charge / discharge tests.
p. 138
If a charge/discharge test is suddenly aborted due to a power outage or other reason, you may be
able to resume the test. Depending on the condition, restoring the test may not be possible.
For details on the setup and handling of the protection function, restarting of tests, emergency
stop, and so on, see the help file for Test Executive of BPChecker3000.
Alarm occurrence
Test Condition Editor
Test Executive
PFX2532 has the following protection function.
If an alarm is received, an error is detected, or a protection
function is activated, the ALARM/WARNING LED lights red, and
an error number is shown in the front panel display. When an
error number is displayed, pressing SELECT will return the
display to normal for about 10 seconds, but after that, the error
number is displayed again.
Normal display returns when you release the alarm.
To the PFX2532 and the connected devices, we recommend
that you set the voltage protection functions.
An error in the two hundreds (Err. 2xx) indicates an internal
error. It can be caused by power supply line or communication noise. Restart the PFX2532 and
BPChecker3000 to see if the error clears. If such errors occur frequently, check the error number, and
contact your Kikusui agent or distributor.
See
?
Help
Example of alarm indication for
wiring error detection
Lit red
Press to return to the normal
display for about 10 seconds.