Kikusui PFX2532, Руководство по эксплуатации

Страница: 57 / 142

PFX2532
57
Assigning IP Addresses
3
P
C
C
o
n
n
e
c
ti
o
n
an
d
H
a
rd
ware
C
o
n
fi
g
u
rat
io
n
3
Select the Internet Protocol Version 4 (TCP / IPv4) check box, and then click
Properties.
4
Click Use the following IP address.
5
Enter the IP address and subnet mask.
If you want to connect to a PFX2532 that has the factory default IP address, set the IP
address to 192.168.1.10 and the subnet mask to 255.255.255.0.
Assigning PFX2532 IP addresses
To use a fixed IP address (when connecting through a switching hub or when connecting directly),
set the PFX2532 IP addresses using IO Config of BPChecker3000.
If you are using automatic IP address assignment (connecting through a router), you do not have to
set this address.
In the factory default settings, a value in the range of 192.168.1.101 to 192.168.1.107 is assigned to
the PFX2532 address. Duplicate IP addresses cannot be used.
For details, see the help file for IO Config of BPChecker3000.
1
Turn on the switching hub, PC, and then the PFX2532.
2
Start IO Config.
3
Click the channel selection search button, check that the PFX2532 you want to
configure is displayed, and then click Connect.
If it is not displayed correctly, it may not be connected correctly, or the channel
number may be overlapping.
4
Select the channel you want to configure, and open the IP address tab.
Enter the IP address, subnet mask, and default gateway.
Specify an IP address that is not being used by another device.
5
On the IP address tab, click Send.
The IP address is sent to the selected PFX2532.
IP address assignment is complete.
6
If you have other channels you want to use, repeat step 4 to step 5 .
7
When you finish configuring all the channels, turn the PFX2532 off and then
back on.
p. 58
To verify whether the IP address has been set correctly, check using the PFX2532 panel.
See