Kikusui PFX2532, Руководство по эксплуатации

Страница: 5 / 142

PFX2532
5
The following safety precautions must be observed to avoid
fire hazards, electric shock, accidents, and device failures.
Keep them in mind and make sure to observe them.
Using the product in a manner that is not specified in this
manual may impair the protection functions provided by the
product.
Users
• This product must be used only by qualified personnel who
understand the contents of this operation manual.
• If an unqualified personnel is to use the product, be sure the
product is handled under the supervision of qualified personnel
(those who have electrical knowledge). This is to prevent the
possibility of personal injury.
Purpose of use
• Never use the product for purposes other than the product’s
intended use.
• This product is not designed or manufactured for general home
or consumer use.
Input power supply
• Use the product within the rated input line voltage range.
• For applying power, use the power cord provided. For details,
see the respective page in this manual.
• The product is an equipment of IEC Overvoltage Category II
(energy-consuming equipment supplied from the fixed
installation).
Cover
• Some parts inside the product are hazardous. Do not remove
the external cover.
Grounding
• The product is IEC Safety Class I equipment (equipment with a
protective conductor terminal). To prevent electric shock, be
sure to connect the protective conductor terminal of the
product to electrical ground (safety ground).
Operation
• Before use, visually check for problems in the power cord,
discharge gun, and high-voltage cable. When checking for
these problems, turn off the circuit breaker of distribution.
• If you notice a malfunction or abnormality in the product, stop
using it immediately, and turn off the circuit breaker of
distribution. Make sure the product is not used until it is
completely repaired.
• Do not disassemble or modify the product. If you need to
modify the product, contact your Kikusui distributor or agent.
Maintenance, inspection, and calibration
• To maintain the performance and safety of the product, we
recommend periodic maintenance, inspection, cleaning, and
calibration.
• To prevent electric shock, be sure to unplug the product before
carrying out maintenance or inspection. Do not remove the
external cover.
• Check periodically that there are no tears or breaks in the power
cord.
• If the panel needs cleaning, gently wipe it using a soft cloth
with water-diluted neutral detergent. Do not use volatile
chemicals such as benzene or thinner.
• This product is calibrated before shipment. To maintain the
product’s performance, we recommend periodic calibration. To
have your product calibrated, contact your Kikusui agent/
distributor.
Service
• Kikusui service engineers will perform internal service of the
product. If the product needs adjustment or repairs, contact
your Kikusui distributor or agent.
Note the following points when moving the
product to the installation location or when
transporting the product.
• Turn the POWER switch off.
Moving the product with the POWER switch turned on may
cause electric shock or damage to the product.
• Remove all wiring.
Moving the product with the cables connected may cause wires
to break or injuries due to the product falling over.
• Increase the number of people or take other safety measures
when carrying the product over a slope or across steps.
• When transporting the product, be sure to use the original
packing materials.
Otherwise, damage may result from vibrations or from the
product falling during transportation.
• Be sure to include this manual.
Safety precautions
Operat
ion
Manu
al
Line
Voltage
G N L
Check?
Precautions When Moving the Product