Kikusui PBZ20-20, Руководство пользователя

Страница: 76 / 170

76
PBZ
Memory Types
The PBZ is equipped with both preset and setup memory.
Differences between Preset and Setup Memory
Primary Usage
Preset memory
You can save settings that are used often in preset memory. There are three memory entries
for CV mode and three memory entries for CC mode (A, B, and C in each mode). Because
you can load saved settings just by pressing a key, this feature is very useful when you want
to switch between three different types of output in order.
Setup memory
You can use setup memory to save all of the basic PBZ settings. You can load the contents of
a memory entry when output is turned off. Check the contents of the memory entry on the
screen, and turn output on again.
Item Preset memory Setup memory
Number of memory entries 3 in CV mode and 3 in CC mode. 10 (independent of the CV/CC mode setting).
Memory number A, B, or C. 0 to 9.
Memory naming Not allowed. 15 characters maximum.
CV/CC mode
Limited to the mode that the PBZ is currently in.
1
No limitations.
2
Bipolar/unipolar mode No limitations in bipolar mode. In unipolar mode,
negative DC signals that were saved in bipolar
mode cannot be loaded.
3
No limitations.
4
Signal source Internal signal sources. Internal signal sources.
Saved settings Settings for DC and AC signals. Settings for DC and AC signals, preset
memory, overvoltage and overcurrent
protection features, and configuration.
When output is turned on Memory entries can be saved or loaded. Memory entries can be saved but not loaded.
When output is turned off Memory entries can be saved or loaded. Memory entries can be saved or loaded.
1
The CV/CC mode setting is not saved. You can only load memory numbers that were saved in the same mode as the mode
that the PBZ is currently in.
2
The CV/CC mode setting is saved. When a memory number is loaded, the PBZ switches to the mode that is specified in the
memory entry.
3
The bipolar/unipolar mode setting is not saved.
4
The bipolar/unipolar mode setting is saved. When a memory number is loaded, the PBZ switches to the mode that is
specified in the memory entry.
A B C