Kikusui PAT160-25T, Руководство по эксплуатации

Страница: 80 / 218

5- 8
PAT-T 4kW
When using the external voltage (Vext)
Connect the wires so that the output is not shorted as shown in Fig.5-5 and Fig.5-6.
The signal w ire may b u rn o u t.
• The signal w ire may b u rn o u t. Leave the Vext o u tp u t floating.
• If yo u are connecting the shield to the Vext side, do not connect the shield
to the o u tp u t terminal of the PAT.
Fig.5-5 A connection in w hich the o u tp u t is short-circ u ited by the
gro u nding of Vext (example of a prohibited connection)
Fig.5-6 A connection in w hich the o u tp u t is short-circ u ited by the
shield (example of a prohibited connection)
CAUTION
+
+
–
+
–
–
2-core shielded w ire
Vext PAT
O u tp u t is short-circ u ited
by the gro u nding of Vext,
ca u sing c u rrent to flo w .
+Gro u nd the positive
o u tp u t terminal.
Prohibited
×
J1
Approx. the same
potential as the negative
o
u tp u t terminal
Approx. the same
potential as the negati
v e
output terminal
+
+
–
+
–
–
2-core shielded wire
V ext PAT
Output is short-circuited
b y the shield, causing
current to flow.
+Ground the positi v e
output terminal.
Prohibited
×
J1