Kikusui PAT160-25T, Руководство по эксплуатации

Страница: 66 / 218

4-24
PAT-T 4kW
CF61 LAN status display
Display the status of the LAN interface. Displayed only when the factory option
LAN interface is installed.
4.8 Preset Memory Function
The PAT has a function that stores up to three combinations of voltage setting and
current setting. You can store a combination by selecting PRESET A, PRESET B,
or PRESET C.
RECALL keys allow you to recall any of the three preset memory values.
• When the phase input mode is changed to the single-phase input mode from the
three-phase input mode, the setting value of the output current and the
overcurrent protection (OCP) is limited to 75 % of the rated value of output
current and the overcurrent protection of the three-phase input mode.
Storing the preset memory values
1
Press the SET key.
The SET key LED illuminates, and the specified voltage and current are shown on the
panel.
2
While vie w ing the panel display, t u rn the VOLTAGE knob to set the
voltage preset memory val u e, the CURRE N T knob to set the c u rrent
preset memory val u e.
3
Press the STORE key w hile holding do w n the SHIFT key.
PRESET A, B, and C LEDs blink in the display.
4
Press any memory key (A, B or C) to be stored, and save the val u e of
preset memory.
The selected preset memory (A, B or C) illuminates on the display.
You can save preset memory values by carrying out step 3 and step 4 with the
output turned on while displaying the measured values (SET key turned off). After
saving the preset memory values, press the SET key to check them.
Display Description
Stby Stand by state (the LA N can not be u sed)
nFLt N o fa u lt state (the LA N is f u nctioned properly)
FLt Fa u lt state (the LA N is not f u nctioned properly)
LAn Display identifying the LA N