Kikusui PAT160-25T, Руководство по эксплуатации

Страница: 122 / 218

7-16
PAT-T 4KW
7.7 IEEE488.2 Common Commands
*CLS
Clears all event registers including the status byte, event status, and error queue.
p. 7-43
Command
*CLS
*ESE
p. 7-46
Sets the event status enable register that is counted by the event summary bit (ESB)
of the status byte.
Command
*ESE <NR1>
*ESE?
Parameter
Val u e: 0 to 255
An SCPI error (-222, “Data out of range”) occurs if outside the
range.
(Example) When *ESE 16 is transmitted, bit 4 of the event status enable register is
set. Each time the execution error bit (bit 4) of the event status register
is set, the summary bit (ESB) of the status byte is set.
Response
Returns the value of the event status enable register in the NR1 form in response to
*ESE?.
*ESR
p. 7-46
Queries the event status register. Registers that are read are cleared.
Command
*ESR?
Response
Returns the value of the event status register in the NR1 form in response to *ESR?
and clears the register.
See
See
See