Kikusui KHA3000, Руководство по эксплуатации, Страница: 223 / 392

9
KHA3000
223
Test Ending Menu
Ex
ecuting V
olta
g
e Fluctuation T
ests

Procedures for inputting a character (F1 key) and deleting a character (F2
key)
1
Press the F1, F2, F3 or F4 key.
The Comment Input dialog will be presented.
2
Use the small knob, large knob or arrow keys to select a character.
3
Press the F1 (Input 1-char) key.
The character selected will be added to the part where the cursor is blinking (Input 1-
char). To delete a character, press the F2 (Delete 1-char) key. To change the character
type, press the F3 (Change char type) key to select the type. To repeat adding or
deleting characters, return to the above step 2.
4
Press the ENTER key.
The characters entered will be fixed and saved.
Save
�
Press the F1 key to select Save.
A dialog box is displayed during saving. A file name is automatically assigned and the
result file is saved to the storage media.
When the saving ends, the menu display
“ Save ” is displayed dimmed and the menu
function key is disabled.If the storage media is not found, the buzzer sounds and the
dialog box
“ Disk Error. Media could not be detected ” is displayed. If the dialog box is
displayed, press the F1 key (OK) and insert a storage media.
12 Delete 1-char This function is used to delete characters from the local Limitation
Standard names or the local Measuring technique names to be
presented in Report Print. On how to use this function, refer to the
procedures shown below. –
13 Return Exit from the character entry/deletion procedures to display local
Limitation Standard or local Measuring technique names. –
14 Return Exit from the setting of standard names to be presented. –
15 Return Terminates the report printing. –
16 Exit Terminates the test. –
17 Analysis (VIEW) Analyses test results. –
18 AC Power Supply OUT-
PUT OFF Turn off the output of the AC power supply. This item is displayed
when it is so set to control the AC power supply. p. 203
F key: Function key.You can also use the ESC key to return.
See
Menu1/1
F1
Save
F2
Report Print
Sub Menu
F3
Exit
F4
Analysis (VIEW)
→
F5
AC Power Supply
OUTPUT OFF
1