Kikusui KHA1000, Руководство по эксплуатации, Страница: 14 / 274

xii
KHA1000
Topical List
Preparation
Settings
Situation Heading
page
How do I start measurements soon? It is time-consuming to
view the standards each time... "3.1 Providing Security for Users
Not Familiar with Test Standards"
3-2
How do I construct a test system?
"2.5 Connecting the Test System"
"2.1.1 Components Used in the
Test System"
2-13
2-3
How do I connect a test system? "2.5 Connecting the Test System" 2-13
How do I check whether the connection to the EUT is
correct? "2.4 Connecting the Rear-side
Terminals"
2-9
What kind of electric wire should be used to connect a test
system and how long should it be?
"2.5 Connecting the Test System" 2-13
How do I know the definition of a term?
"3.1 Providing Security for Users
Not Familiar with Test Standards"
3-2
Situation Heading
page
How do I build a menu quickly? "4.3 Basics of Menu Operation" 4-7
What items must the user set before starting a test?
"4.4 Settings the Test System"
"4.5 Control to External Devices" 4-12
4-19
How do I measure harmonic current using JIS standards?
"5.2 Setting JIS C61000-3-2(2005)
and JIS C61000-3-2(2019)Test
Conditions"
"5.3 Setting JIS C61000-3-2(2003)
Test Conditions"
5-9
5-15
How do I measure harmonic current using IEC standards?
"5.1 Setting IEC 61000-3-2 (Ed2.2/
Ed3.0/Ed5.0) Test Conditions"
5-2
How do I measure harmonic current using IEC standards
without measuring harmonic groups?
"5.1.1 Standards, Classes, Voltage
and Current Ranges, and Nominal
Values"
5-3
How do I set the power supply for measurements? "4.5 Control to External Devices" 4-19
How do I know the classification methods?
"5.1.1 Standards, Classes, Voltage
and Current Ranges, and Nominal
Values"
"5.2.1 Standards, Classes, Voltage
and Current Ranges, and Nominal
Values"
"5.3.1 Standards, Classes, Voltage
and Current Ranges, and Nominal
Values"
5-3
5-10
5-16
How should the ignored harmonic current be processed? " Ignore 5 mA

0.6 %" 5-20
How do I correctly select impedance?
"2.5.1 Connecting the AC Power
Supply and Line Impedance
Network"
2-12
How do I set the same setting conditions as in the previous
test? "4.6.2 Loading a Test Condition
File"
4-23
How do I automatically perform the d measurement of the
voltage fluctuation?
"6.1.1 Limitation Std, Meas Technic,
and Measuring Methods, Voltage
and Current Ranges"
6-3
See
See