Kikusui KFM2151, Руководство по эксплуатации

Страница: 56 / 112

4-2
KFM2151
Remote Control
4.1 Overview
In addition to using the front panel, the KFM2151 can be controlled remotely using
the RS232C interface.
The remote interface complies with IEEE 488.2 std 1992 and SCPI Specification
1999.0.
Page 4-5
Use the SCPI commands only after you have understood the SCPI command syntax
for the KFM2151.
4.2 Instrument Interface Standards
The KFM2151 conforms to the following standards.
• IEEE Std 488.2-1992 IEEE Standard Codes, Formats, Protocols, and Common
Commands For Use With IEEE Std 488.1-1987
• Standard Commands for Programmable Instruments (SCPI) version 1999.0
4.3 Interface Setup
The remote control interface is RS232C.
RS232C connection
Turn off the POWER switch on the KFM2151 and the computer.
Connect the KFM2151 to the PC using an RS232C cable. The RS232C cable is not
included in the package.
If you are using the KFM2151 as an impedance measurement system in
combination with the KFM2150, connect the KFM2150 and the KFM2151 to the
PC. We recommend that the KFM2150 be connected to the PC using USB or GPIB.
If you are using the RS232C, you must use a PC that has two RS232C ports.
See