28 Remote Control
KDS6-0.2TR
4.1.2
RS-232C Interface
To use the RS-232C interface, the communication protocol of the KDS6-0.2TR
must match that of the personal computer (PC) that is to serve as a controller.
For the setting method on the PC side, refer to your computer manual.
■
Communication protocol of the KDS6-0.2TR
Setting the bit rate
To change the bit rate, first activate the GPIB address setting mode, press the
LOCAL key again to change the mode, and choose the desired setting.
1.
Display the GPIB address as described in "Setting the GPIB address"
in 4.1.1, "GPIB Interface."
2.
Press the LOCAL key.
Pressing the LOCAL key toggles the device between RS-232C mode and
GPIB mode. RS-232C mode is active when 232 is displayed in the output
ammeter. The voltage setting display shows the present RS-232C bit rate.
Sample display:
3.
Change the RS-232C bit rate by turning the voltage control knob.
The bit rate can be set at 2400, 4800, 9600, 19200, or 38400 bps.
When turning the knob counterclockwise, each click selects the next-smaller
value; once 2400 is reached, continuing to turn the knob will not change the
value.
When the knob is turned clockwise, each click selects the next-higher value;
once 38400 is reached, continuing to turn the knob will not change the value.
Bit rate
*1
*1.
The KDS6-0.2TR was factory-shipped with the bit rate set to 19200 bps.
To change the bit rate, follow the procedure described below.
2400, 4800, 9600, 19200, or 38400 bps
Data bit
*2
*2.
This setting is fixed. Set the PC to be used accordingly.
8 bits (Fixed)
Parity
None (Fixed)
Stop bit
1 bit (Fixed)
Flow control
*3
*3.
If you do not use flow control, perform settings such that “acknowledge
messages” will be returned via the “SILent message.” Perform settings
such that the next message will be sent after the acknowledge messages are
confirmed, as one-sided transmission may result in incorrect transmission
and/or reception.
XON/XOFF
Present bit rate
Содержание KDS6-0.2TR
