manualshive.com logo in svg

Kikusui DME1500, Руководство по эксплуатации, Страница: 39 / 76

Поделиться
Скачать
Kikusui DME1500 Скачать руководство пользователя страница 39

DME1500

Safety Precautions E-3

 

Cover

 

• There are parts inside the product which may

cause physical hazards. Do not remove the
external cover.

 

Installation

 

• When installing products be sure to observe

"Precautions for Installation" described in this
manual.

• To avoid electrical shock, connect the protective

ground terminal to electrical ground (safety
ground).

• When applying power to the products from a

switchboard, be sure work is performed by a
qualified and licensed electrician or is conducted
under the direction of such a person.

• When installing products with casters, be sure to

lock the casters.

 

Relocation

 

• Turn off the power switch and then disconnect all

cables when relocating the product.

• Use two or more persons when relocating the

product which weights more than 20 kg. The
weight of the products can be found on the rear
panel of the product and/or in this operation
manual.

• Use extra precautions such as using more people

when relocating into or out of present locations
including inclines or steps. Also handle carefully
when relocating tall products as they can fall over
easily.

• Be sure the operation manual be included when

the product is relocated.

G

N

L

Содержание DME1500













































































Отзывы:

Нет отзывов