background image

 

Training Instructions 

 
To achieve a considerable improvement of your 
physical resistance and your health, some aspects of 
how to find the most efficient amount of training should 
be followed: 
If you have not been physically active for a longer period 
of time and also to avoid health risks you should consult 
your general physician before starting to exercise. 
 

Intensity 

To achieve maximum results the right intensity has to be 
chosen. 
The heart rate is used as guideline. 
As a rule of thumb the following formula is commonly 
used: 
 

Maximum pulse rate = 220 - Age 

 
While exercising the pulse rate should always be 
between 60% - 85% of the maximum pulse rate. 
For your personal training rates please see the attached 
pulse rate chart on page 14. 
 
When starting to exercise you should keep your rate at 
60% of your maximum pulse rate in the first couple of 
weeks. 
With increasing improvement of fitness the pulse rate 
should be slowly increased to 85% of your maximum 
pulse rate. 
 

Fat burning 

The body starts to burn fat at approx. 60% of the 
maximum pulse rate. 
To reach an optimum at burning rate, it is advisable to 
keep the pulse rate between 60% – 70% of the 
maximum pulse rate. 
 
The optimum training amount consists of three workouts 
per week 30 minutes each. 
 
Example: 
You are 52 years of age and would like to start 
exercising. 
Maximum pulse rate = 220 - 52(age) = 168 pulse/min 
Minimum pulse rate = 168 x 0.6 = 101 pulse/min 
Highest pulse rate = 168 x 0.7 = 117 pulse/min 
During the first weeks it is advisable to start with a pulse 
rate of 101, afterwards increase it to 117. 

With increasing improvement of fitness the training 
intensity should be increased to 70% - 85% of your 
maximum pulse rate. 
This can be done by increasing the resistance, a higher 
frequency or longer training periods. 
 

Training Organization 
 
Warm-up: 

Before every your training, you should warm-up for 5-10 
minutes. 
Here you can do some stretching and training with low 
resistance. 
 

Training session: 

 
During the actual training a rate of 70% -85% of the 
maximum pulse rate should be chosen. 
The time-length of your training session can be 
calculated with the following rule of thumb: 
 

 

daily training session: approx. 10 min. per unit 

 

2-3 x per week:           approx. 30 min. per unit 

 

1-2 x per week:           approx. 60 min. per unit  

 

Cool down: 

To introduce an effective cool-down of the muscles and 
the metabolism the intensity should be drastically 
decreased during the last 5 – 10 minutes. 
Stretching is also helpful for the prevention of muscle 
aches. 
 

Success 

Even after a short period of regular exercises you will 
notice that you constantly have to increase the 
resistance to reach your optimum pulse rate. 
The units will be continuously easier and you will feel a 
lot fitter during your normal day. 
 
For this achievement you should motivate yourself to 
exercise regularly. 
Choose fixed hours for your training session and do not 
start training too aggressively. 
 
An old quote amongst sportsmen says: 
“The most difficult thing about training is to start it.” 
 

Wish you have a lot of fun and success with your 
bike,

GB 

- 10 -  

Содержание HM-9090M
















Отзывы: