Kikkoman Biochemifa PD-20 Скачать руководство пользователя страница 4

Страница: 4 / 18

1. Please read first

This kit is used to check the indicated value of Lumitester Smart/PD-30/PD-20.
Please do not use it for the other purposes.

“WARNING” indicates a potentially hazardous situations Which, if not
avoided, could result in death or serious injury.

CAUTION

"CAUTION" indicates a potentially hazardous situation which, if not
avoided, could result in minor or moderate injury or damage to the
equipment.

In addition to the above alert symbols and signal words, the following warning
symbols are used in this manual to designate the degree of hazard and damage that
might occur if this product is used incorrectly.

Mandatory

This symbol indicates a mandatory action.

Prohibited

This symbol indicates a prohibited action.

Electrical shock hazard

This symbol indicates a risk of electrical shock.

Fire hazard

This symbol indicates a risk of smoke emission or fire.

Explosive hazard

This symbol indicates a risk of explosion

Toxic hazard

This symbol indicates a toxic substance risk.

Corrosion hazard

This symbol indicates a risk of corrosion.

This operation manual uses following symbols for safe and proper use.

Symbols

WARNING

Содержание PD-20



















Результаты поиска

Содержание PD-20

Отзывы:

Бренды по названию

Популярные бренды

Kikkoman Biochemifa PD-20, Руководство по эксплуатации

Результаты поиска

Содержание PD-20

Отзывы:

Бренды по названию

Популярные бренды