9
Connecting Your Kika Katalyst Wireless Mobile 4G/LTE Booster
Connect the USB power cable into the Kika Katylst Wireless Cellular 4G/LTE Booster at the spot labeled “POW-
ER”. Then plug the power cable receptacle into vehicle’s power receptacle. When you see the green LED lights, this
indicates your Kika Katylst Wireless Cellular 4G/LTE Booster is working and connected correctly.
Push the On/Off switch to get the unit working correctly as you should see a green LED light displayed.
If you see a red LED light on your Kika Katylst Wireless Cellular 4G/LTE Booster, your antennas are not placed cor-
rectly. Disconnect your power cable to the Kika Katylst Wireless Cellular 4G/LTE Booster, and increase one or both
the distance between the external and internal antennas.
Reconnect the power cable into your vehicle’s power supply. and push the on/off button on, if The green LED light is
on, your Kika Katylst Wireless Cellular 4G/LTE Booster is functioning correctly. If the red LED light appears repeat
the previous step as many times is necessary until a green LED light appears.
THE USE OF NON KIKA M2M LISTED ANTENNAS, CABLES OR EXTEDING THE CABLE
LENGTH IS NOT PERMITTED BY THE FCC AND CAUSE THE BOOSTER TO SHUT DOWN AND
MAY DAMAGE THE BOOSTER AND COULD VOID YOUR WARRANTY.
