*Remove the Tongue from the Tow Bar Adaptor on the Front Wheel
Assembly
*Lift the Front Wheel Assembly off the ground by extending the
Tongue Jack
* Remove the Front Wheel Assembly from the machine chassis
* Bolt the Tongue to the machine chassis
Un-bolt Tongue from
Front Wheel Assembly
Un-bolt Front Wheel
Assembly from machine
chassis
Extend Tongue
Jack
NOTE:
Kifco recommends that all users that transport the T210L & T230 Water Reels by tractor
should remove the front wheel and install the rigid tongue directly to the machine (See instructions) and never
attempt to back up units with the front wheel installed.The third wheel installed is designed for towed by lower
horsepower UTV, Side-by-side or Gator type vehicle only and was not designed to be towed by higher
horsepower Tractors. Kifco recommends that all Rigid tongue towed Water Reels should never be towed at
speeds exceeding 10 MPH on smooth ground and slower for bumpy or inclined surfaces.
Lastly, Kifco recommends that users constantly monitor the Water Reel while being towed and adjust or slow
the tow of the Water Reel if the machines begins to bounces or wander to avoid damage or injury.
