manualshive.com logo in svg

KIESELMANN 6125, Руководство по эксплуатации, Страница: 20 / 32

Поделиться
Скачать
KIESELMANN 6125 Скачать руководство пользователя страница 20

Operating instruction | KIESELMANN GmbH

8 | Disassembly and assembly

20 / 32

6125_APNV_EN

Dismantle - manual steam valve mDV

• Open the valve with the hand wheel (mD5) completely. Dismount the circlip (mD7). Remove

disc (mD6) and hand wheel (mD5). Dismount the circlip (mD8). Pull the bolt (mD4) from the
housing. Unscrew the piston (mD1). Dismantle the O-ring (D2), (D7). Remove the wearing parts.

mDV

mD5

mD4

mD7

mD6

mD4

mD7

mD6

mD5

• Unscrew piston (mD1) from shaft (mD2). Remove the wearing parts.

mD1

mD3

mD4

mD7

mD6

mD5

mD8

mD3

mD2

D7

mD1

8.4 Assemble - steam valve

• Before installation, thoroughly clean and slightly lubricate mounting areas and running sur-

faces.

• Lightly grease and mounting the O-rings.

 CAUTION

Ø

Thread connection (G2) is secured with a screw retention.

Ø

After unscrewing the piston (D1) e.g. (mD1) it must always be replaced.

–

Remove all adhesive residue on the threaded connection (G1) and degrease thoroughly.
During assembly secure the new piston again with a Screw retention detachable (e.g. Loc-
tite 243).

Содержание 6125

































Отзывы:

Нет отзывов