Kielder KWT-002, Оригинальное руководство пользователя

Страница: 3 / 20

3
Kielder WT Ltd KWT-002-012-IMB22
Noise & Vibration Data
Acoustic Pressure: <97 dB(A) K=3dB
Acoustic Power: <108 dB(A) K=3dB
Maximum Vibration: 15.9m/s2 / K = 1.5m/s2
Sound emission values determined according to
EN60745-2-1. The declared vibration total value has
been measured in accordance with a standard test
method used to compare one tool with another and
according to EN60745. Both sound and vibration
values have an uncertainty factor of K. The declared
total values may be used in a preliminary assessment
of exposure.
WARNING!
The vibration emission during actual
use of the power tool can differ from
the declared total value depending on
the ways in which the tool is used. The need to identify
safety measures and to protect the operator are based
on an estimation of exposure in the actual conditions
of use (taking account of all parts of the operating
cycle, such as the times the tool is switched off, when
it is running idle, in addition to trigger time). Identify
additional safety measures to protect the operator such
as proper maintenance of the tool, keeping hands warm
and organisation of work patterns.
CONTENTS
Safety Rules & Instruction 4
Product Overview Diagram 8
Specification Table 9
Usage
Wrench
10
Battery 12
Charger 14
Maintenance & Operating Torque 16
LED Light & Belt Clip 17
Warranty & Support 18
EC - Declaration Of Conformity
We declare that under our responsibility the
product under part number:
KWT-002 & KWT-012 18V Cordless Impact
Wrench complies with the applicable EU
directives:
2011/65/EU, 2004/108/EC, 2006/42/EC
including the amendments and are manufactured
in accordance following standards or
standardised documents:
EN 60745-1:2009+A11
EN 60745-2-2:2010
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
All documentation is held in KWT-002 Technical
File and is available, on request for review.
Authorised Signatory:
Steven Bulloss
Director
Dated: 01/01/2018
Kielder WT Ltd, Unit 14 Carlisle Business Park,
40 Chambers Lane, Sheffield S4 8DA
IMPORTANT!
Please read these operating and
safety instructions carefully and
completely. For your own safety, before using this
equipment check that the voltage is correct and
that all external parts are firmly secured and the
machine in tact. If you are uncertain about any
aspect of using this equipment, or require support
please contact Kielder WT customer services and
we’ll be happy to help:
Tel: 0114 242 3794
Email: tools@kielder.co
Plug Type
• The appliance is supplied with a moulded
three pin mains plug for your safety and
convenience.
• Only use this plug in the socket it is intended.
• A 3 amp fuse is fitted in this plug. Should the
fuse need to be replaced please ensure that
the replacement fuse has a 3 amp rating and
it is approved by ASTA or BSI to BS1362.
• Check for the ASTA mark or the BSI mark on
the fuse.
• If the plug contains a removable fuse cover,
you must ensure that it is refitted when the
fuse is replaced.
• If you lose the fuse cover the plug must not be
used until a replacement cover is obtained.
Intended Use
The tool is intended for the fastening and
unfastening of threaded bolts and nuts.