background image

A

Page 2 / 10

Product Description

DS230/4..32 Actuating Drives

Datasheet 3.50-32.020-01-EN

Important Information Regarding Product Safety

Safety Instructions

This data sheet contains information on installing and commissioning the product "DS230/4..32 Actuating 
Drives". Each person who carries out work on this product must have read and understood this data sheet. If 
you have any questions that are not resolved by this data sheet, you can obtain further information from the 
supplier or manufacturer.
If the product is not used in accordance with this data sheet, the protection provided will be impaired.
Applicable regulations must be observed when installing and using the device.  Within the EU, these include 
regulations regarding occupational safety and accident prevention as well as those from the VDE (Association 
for Electrical, Electronic & Information Technologies). If the device is used in other countries, it is the responsi-
bility of the system installer or operator to comply with local regulations.
Mounting, installation and commissioning work on the devices may only be carried out by qualified technicians. 
Qualified technicians are persons who are familiar with the described product and who can assess given tasks 
and recognize possible dangers due to technical training, knowledge and experience as well as knowledge of 
the appropriate regulations.

Meaning of the Symbols

WARNING

Indicates a hazard of medium risk which can result in death or severe bodily injury if it is not avoided.

CAUTION

Indicates a hazard of low risk which can result in minor or medium bodily injury if it is not avoided.

!

NOTICE

Indicates a hazard of medium risk which can result in material damage or malfunctions if it is not avoided.

Note

Indicates additional information that can simplify the work with the product for you.

Notes on Disposal

For disposal, the product is considered waste from electrical and electronic equipment (electronic waste) and 
must not be disposed of as household waste. Special treatment for specific components may be legally binding 
or ecologically sensible. The local and currently applicable legislation must be observed.

Содержание DS230











Отзывы: