background image

Kieback&Peter GmbH & Co. KG
Tempelhofer Weg 50, 12347 Berlin/Germany
Telefon: +49 30 60095-0, Telefax: +49 30 60095-164
www.kieback-peter.de, [email protected]

Datasheet 2.50-12.501-01-EN

DCS2501

Issue 2014-05-20

A

Änderungen vorbehalten - Contents subject to change - Sous réserve de modifications -

 

Reservado el derecho a modificación

 

- Wijzigingen

voorbehouden - Con riserva di modifiche - Innehåll som skall ändras - Zm

ě

ny vyhrazeny - Zmiany zastrze

ż

one - 

Возможны

 

изменения

 

-

A változtatások jogát fenntartjuk -

 

ֱ⬭᳾㒣䗮ⶹ㗠ᬍࡼⱘᴗ࡯

Product Description

DCS2501 Gateway (Internet)

Application

The DCS2501 is an Ethernet gateway in System 3000. It allows you to 
connect to a remote BMS via the Internet.
The DCS2501 features a P90 interface for direct communication with a 
DDC3000, an HRP or an LRP.
The DCS2501 enables you to replace an existing modem connection 
with an Internet connection.

Content

Page

Important Information Regarding Product Safety ..................................................................................................2
Item........................................................................................................................................................................3

Technical Data.....................................................................................................................................................3
Compatibility ........................................................................................................................................................3
Dimensions ..........................................................................................................................................................3
Connection...........................................................................................................................................................4

Mounting ................................................................................................................................................................5
Removal.................................................................................................................................................................5
Indicators and Controls..........................................................................................................................................6

LEDs ....................................................................................................................................................................6
Reset button ........................................................................................................................................................7

Commissioning ......................................................................................................................................................8

Configuring the DCS2501....................................................................................................................................9
Configuring the controller...................................................................................................................................11
Configuring the BMS..........................................................................................................................................12

Preparation ..........................................................................................................................................................13

Содержание DCS2501















Отзывы: