• Avoid continuously hitting into obstacle to prevent overheating or damaging the motor. Drive away or
remove obstacle as soon as possible.
• Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
losses, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
WARNING
--
FAILURE TO FOLLOW THE SAFETY INSTRUCTIONS LISTED BELOW MAY RESULT IN SERIOUS INJURY OR DEATH
.
Child Safety Warnings
•
Adults supervising children must read and understand this entire manual before allowing any child
to use this product.
Adults must evaluate their own children as to maturity, strength, judgment and ability to follow
safety rules. Published age guidelines are not a substitute for careful evaluation of your own child.
has ever controlled a motorized ride-on toy. While you supervise, see through the child’s eyes, and
verbally teach them about steering and avoiding obstacles in the approved riding area.
Riding a motorized ride-on toy can be a dangerous activity, even under the best of circumstances.
Good choices regarding where and when to ride, constant adult supervision of riding, and practice
and careful riding by the child can all help to minimize risk. However this ride-on toy is intended to
situations that no amount of care, instruction or expertise can eliminate.
If this inherent risk is not acceptable, adults should not allow children to ride this ride-on toy.
•
•
•
•
The owner’s manual contains assembly, use and maintenance instructions.
WARNING
WARNING
WARNING:
WARNING:
WARNING:
WARNING:
Stop operating this product whenever it stuck under any circumstances.
Friction Hazards! Do not operate this product on carpets or rugs, it may cause burn or
or operated incorrectly, wait for 10-15 seconds to reactivate this product automatically.
This toy is to be assembled by an adult. Contains potentially hazardous sharp edges and
sharp points, or contains small parts before assembly.
Do not drive this vehicle into any puddle or contact with any liquids to avoid the electrical
shock to product or user.
2
