User Instruction
Operating the vehicle
• Press the power switch to turn on the vehicle.
• Push or pull the control sticks to move the vehicle.
• Release the control stick back to the center position to stop.
Using the remote control
The remote control should only be used by adult.
⚠
WARNING
• Close supervision is needed when children is operating the vehicle.
Frequency Binding
The remote control needs to frequency bind for the first time usage or after replacing the battery.
• Insert batteries into the remote control.
• Press the “M” button for 2 - 4 seconds, the indicator will flash.
• Turn on the power of the vehicle, the indicator should change to a solid light.
If failed to bind, remove and replace the battery from the remote control and repeat the previous steps.
Control the vehicle
• Press the directional buttons to move the vehicle.
• Press the “P” button to enable emergency brake. All running function will be disabled once the button is
pressed. Press “P” button again to disable.
NOTE: The remote control will goes into power saving mode if not used after 10 seconds.