KIDWELL FOSAMAV01A1, Руководство пользователя, Страница: 26 / 44

26
A. In order to loosen the harness straps, push the central adjusting button which
is located in the center part of the safety seat (see Product Components, element
10). While pushing the central adjusting button, pull the shoulder straps in order to
extend their length.
B. Push the red button on the central harness buckle to unfasten the harness. Adjust
the length in a way that both, the right and the left shoulder strap are the same
length
C. Attach the shoulder strap buckles together before they are connected by the central
adjusting button. When connecting all of the straps together you should hear
a “Click” sound signifying that the harness has been fastened properly.
D. While fastening the harness, make sure that the hip strap and the shoulder straps
are fi xed adequately tight against the body of the child. Too much freedom or too
little freedom of the harness against the body of the child could result in danger
being posed to the child.
E. The safety belts have 3 possible heights, to change positions remove the belts
from the connector (see diagram, item No. 18), then pull them out of the gap and
insert in the correct height for the child. Reattach the straps to the connector.
ATTENTION: when moving the straps to a di
ff
erent height, make sure they are not
twisted. This can cause the belts to not work properly
Press and pull the headrest height adjustment handle (see the Product Components,
element 16). The headrest can be moved upwards and downwards. The headrest
height adjustment handle should be released, when the desired height of the headrest
for child’s comfort and safety is achieved.
5-POINT HARNESS SYSTEM FASTENING AND ADJUSTMENT
ADJUSTING HEADREST HEIGHT
2
3
Never use child safety
seats on vehicle seats
which are not equipped
with 3-Point seat belt
systems
To change the base position, lay the safety seat on its side and pull it. When the base
position is unlocked, rotate it to the other side of the seat base.
ATTENTION: you must fi rmly push the base position to connect to the base - a loud
„click” will be heard.
BASE POSITION ADJUSTMENT
4