Assembly
It’s easiest to perform the following steps from the underside of the RAM body. To avoid scratching the
body, perform all assembly steps on a soft surface such as a carpet or cardboard.
Tip!
Insert the Rear Axle
1.
Carefully turn the Ram body
upside down.
2.
Align the stop tabs on the
axle with axle hole to allow
the axle to easily slide
through the axle tube.
3.
Slide the axle through the
axle hole making sure that
each axle extends equal
length on both sides of
the axle tube.
Insert the Gear Boxes
4.
Slide the gear box onto
the end of the axle.
5.
Be sure the gear box fits
correctly into the gear box
stop. The motor should be
completely inserted under
the axle and square tubing
as shown.
6.
Repeat step 1-2 for the
opposite gear box.
axle should
be an equal
length on
each side
5
2
3
4
5
