KidTrax Mercedes ML 5F60AD7, Руководство пользователя

Страница: 9 / 26

9
❷ Insert a screw into each screw hole, and tighten the screws.
Figure 3.3
❸ Insert the rear bracket into the slot at the front of the rear
assembly. The slotted end of the rear bracket will fit into
the inset located near the rear axle.
❹ Insert a screw into each of the four screw holes on the rear
bracket, and tighten the screws. Figure 3.4
Four rear screws are needed for this step.
2 2
Two rear screws are needed for this step.
3
4
4
Figure 3.4
4 4
Figure 3.3